Products Description
Descriptions
Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction.
In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.
Advantages and Characteristics
1 High capacity
2 High concentration ratio and high recovery
3 Easy to install, operate and maintain
4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
5 Saving water 30-40% than ordinary jig
6 The pulsation speed very easy adjusted by regulator
7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc
Main Technical Parameters
Model | Hutch | Diaphragm | Feeding Size (mm) | Makeup water (m3/t) | Makeup water pressure (Mpa) | Capacity (t/h) | Power (kw) | Dimensions (mm) | Weight (Kg) | ||
Shape | Area (m2) | Stroke (mm) | Frequency of stroke (r/min) | ||||||||
JT0.57-1 | Trapezoid | 0.57 | 8.5—12 10—17 12-21 | 80-180 | <6 | 1-2 | ≥0.05 | 1.5-3 | 1.5 | 1550×780×1530 | 610 |
JT1-1 | Trapezoid | 1.04 | <10 | 2-3 | 2.5-5 | 2.2 | 2270×1110×1890 | 900 | |||
JT2-2 | Rectangle | 2.28 | <10 | 2-4 | 5-10 | 3 | 3225×1550×2050 | 1640 | |||
JT3-1 | Trapezoid | 3 | 12-30 | 50-125 | <10 | 3-6 | 7.5-15 | 5.5 | 2745×2000×3030 | 3085 | |
JT4-2 | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 7.5 | 4240×1990×2750 | 3098 | ||
JT4-2S | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 4×2 | 4240×1990×2750 | 3500 | ||
JT5-2 | Trapezoid | 4.86 | 12-30 | <10 | 3-6 | 12-25 | 7.5 | 3600×2000×2600 | 4500 | ||
Tags:
Technical parameter
Italian customer processed roc
Russian customer processed all
Cassiterite tin ore beneficiat
100TPH Placer gold recovery pl
Main Technical Parameters
Model | Hutch | Diaphragm | Feeding Size (mm) | Makeup water (m3/t) | Makeup water pressure (Mpa) | Capacity (t/h) | Power (kw) | Dimensions (mm) | Weight (Kg) | ||
Shape | Area (m2) | Stroke (mm) | Frequency of stroke (r/min) | ||||||||
JT0.57-1 | Trapezoid | 0.57 | 8.5—12 10—17 12-21 | 80-180 | <6 | 1-2 | ≥0.05 | 1.5-3 | 1.5 | 1550×780×1530 | 610 |
JT1-1 | Trapezoid | 1.04 | <10 | 2-3 | 2.5-5 | 2.2 | 2270×1110×1890 | 900 | |||
JT2-2 | Rectangle | 2.28 | <10 | 2-4 | 5-10 | 3 | 3225×1550×2050 | 1640 | |||
JT3-1 | Trapezoid | 3 | 12-30 | 50-125 | <10 | 3-6 | 7.5-15 | 5.5 | 2745×2000×3030 | 3085 | |
JT4-2 | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 7.5 | 4240×1990×2750 | 3098 | ||
JT4-2S | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 4×2 | 4240×1990×2750 | 3500 | ||
JT5-2 | Trapezoid | 4.86 | 12-30 | <10 | 3-6 | 12-25 | 7.5 | 3600×2000×2600 | 4500 | ||