Portable 9100D Shaker Table – Reliable Field Vibration Testing Solution

Ah, now, this 9100D shaker table, well, that’s a bit of a thing, isn’t it? Folks around here don’t see much of that fancy stuff, but if you’re after testing them vibration sensors, this 9100D’s got what you need, plain as day. It’s a portable vibration shaker table, see? Small enough to take with ya out in the field. So, say you’re out there needing to check them sensors, you don’t need to haul everything back – just use this table right where you are.

This here shaker table’s range runs from 5 Hz to 10 kHz, and that’s covering a pretty wide span if you ask me. It’ll let you get them sensors tested from all kinds of angles – slow to quick shakes, you name it. You get a maximum amplitude of 20 g, or 20 inches per second if you like, which is a whole lotta shaking, just saying. So if it’s checking those fancy things like accelerometers y vibration monitors, well, this little table is just the ticket.

Now, what’s nice about this 9100D table is it’s portable. Portable’s important, right? Especially when you’re in the middle of some big field project. You can take it along and check your tools, check your sensors, all on-site. No lugging stuff back to a workshop. Saves ya time and effort, and we all know time’s money, right? It’s got its own case, so it’s easy enough to carry around, and you don’t need a degree to get it working. Plug it in, set your frequency, and away you go – as easy as pie.

So, what’s it used for, this 9100D? Well, it’s handy for testing accelerometers, like I said, but it does more than just that. This little table’s great for checking vibration monitoring systems too. Got a velocity transducer or a proximity probe? Toss it on the table, give it a shake, and you’ll see if it’s reading right. Those fancy labs might have big tables, but when you’re out in the field, this one’s what you’ll want for those loop checks and sensor diagnostics. A real lifesaver, this one.

• Easy to carry – fits right in a truck or van
• Wide frequency range – from 5 Hz to 10 kHz
• Strong amplitude – up to 20 g
• Works for accelerometers, velocity transducersy proximity probes

Now, if you’re dealing with some complicated equipment, like checking them sensors or calibrating monitors, you’ll want to know that the 9100D shaker table can cover just about anything. It’s all about keeping your equipment in check, especially the sensitive stuff that might get thrown off by a bump here or a drop there. With this table, you get a way to catch any little problems before they become big ones.

One more thing, this 9100D table is also good for seismic testing – not the whole earthquake kind, mind you, but it can mimic a bit of what you might need for smaller tests. So, if you’ve got structures or parts you need to see hold steady under a shake, this table’s a good place to start. No need for a whole lab, just plug it in, set your speed, and off you go.

In the end, if it’s sensor testing o vibration checks you need, this here 9100D shaker table is a mighty fine tool. It’s got the range, the strength, and the portability – all packed up and ready to go wherever you are. So next time you’re out there needing a quick check on the spot, this table’s your friend, no fancy setup or extras needed. Just a straight-up, no-nonsense way to keep your sensors in line.

Tags：[9100D shaker table, portable vibration tester, sensor calibration, accelerometer testing, field equipment, seismic simulation, vibration monitor check]