Mogensen Shaker Table Plans: Build Your Own Iconic Solid Oak Design

Well, let me tell ya, if you’re lookin’ to build yourself a fine table like them Shaker folks used to make, you came to the right place! Now, this ain’t no fancy talk or anything, just a simple guide to help ya out with makin’ a proper mogensen shaker table. You see, Brge Mogensen, a fella from Denmark, he designed these here tables, and they ain’t just any tables. They are strong, sturdy, and real simple in design, just like the folks in the Shaker movement used to make. The Shakers, they liked things plain and useful, no fancy frills. So, if you want to make one of these tables, I’m gonna walk ya through it step by step, so you can get it done without all them fancy tools and tricks.

First off, ya gotta know that Brge Mogensen’s shaker tables are made out of solid oak, and that’s what gives ‘em their long-lastin’ quality. Oak ain’t cheap, but if you’re lookin’ for a table that’ll last ya a lifetime, it’s worth the investment. Now, let’s talk about the design a little. It’s real simple, with clean lines and sturdy legs, just like a table should be. No fancy carvings, no big ole decorations—just plain and functional.

Now, here’s what you’ll need for the job:

• Solid oak wood (of course!)
• Table saw (or hand saw if you ain’t got a table saw)
• Drill with some screws
• Wood glue
• Sanding paper to smooth things out
• Wood finish or oil to protect the wood

So, let’s get to it. First thing, you need to measure how big you want your table. Brge’s tables were usually rectangular, so maybe aim for somethin’ like that, unless you got a smaller space. Measure twice, cut once, as they say! Once ya got your measurements, it’s time to cut that oak into the right pieces. You’re gonna need a top piece, four legs, and some side supports to hold everything together. Don’t forget about the apron, which is that little piece of wood that goes around the edges underneath the table top—helps hold everything sturdy.

When you got all your pieces cut, it’s time to start puttin’ ‘em together. Start by gluin’ and screwin’ the apron to the table top. Make sure it’s square, so you don’t end up with a crooked table. Then, attach your legs, usin’ the screws and glue to keep ‘em nice and tight. If you’re addin’ any extension leaves, you’ll need to make sure they slide in and out easily, but still stay nice and sturdy when they’re in place.

Once it’s all put together, you’re gonna want to sand it down real nice. Now, I ain’t talkin’ about just a quick once-over. Take your time, get all the rough spots smooth, and make it feel good to the touch. You don’t want no splinters or sharp edges, so make sure it’s all evened out. After that, you can stain or oil the table to give it a good finish and help protect the wood. Oak’s a tough wood, but it’ll last even longer with a little protection. If you want that classic look like Brge’s designs, use a nice natural oil finish to keep that wood’s beauty showin’ through.

Now, let me tell ya something about them Shaker tables. They’re known for their simple beauty and durability. The Shakers were a group of folks that didn’t believe in all the extra stuff. They believed in making things that worked well and would last. So, when you make a table like this, you’re not just makin’ furniture; you’re makin’ a piece of history. The Shakers, they used strong, solid materials and made sure everything was put together so it’d last. That’s the same way Brge Mogensen designed his shaker tables, and that’s what makes ‘em so special. They got that clean, simple style, but they’re built to last.

One thing you might notice when you look at these tables is the way they fit in with any style of room. Whether you got a rustic farmhouse or a more modern place, a shaker table fits right in. That’s the beauty of it. You don’t need a whole lot of fancy decorations or matching chairs to make it work. The table itself is the centerpiece, and everything else just falls into place.

Now, if you’re interested in gettin’ a table like this but don’t wanna build it yourself, well, I don’t blame ya! Ain’t no shame in buyin’ one, especially if you find one of them that’s made out of solid oak like Brge’s designs. You can find ‘em from places like Fredericia Furniture, or if you got a little money saved up, you might even be able to find a nice used one in good condition. Just remember, if you’re gonna buy one, make sure it’s solid oak and not some cheap imitation. Quality matters, just like when you’re buildin’ it yourself!

So, there ya go. Whether you’re makin’ your own table or buyin’ one, a shaker table like Brge Mogensen’s is a fine choice. Simple, strong, and sure to last you a long time. Now, go on and get started on your project, or go find you a nice one to buy. Either way, you’ll be enjoyin’ a beautiful table that’ll serve you well for many years to come!

Tags：[Mogensen shaker table plans, Shaker table, solid oak table, Brge Mogensen design, shaker dining table, handmade table, Shaker style furniture, Fredericia Furniture]