Free Gold Shaker Table Plans: Design Your Own Efficient Separator

Well now, if you’re lookin’ to build yourself a shaker table to get that gold from all them little flakes, let me tell ya, it ain’t as hard as some folks might think. I’ve seen a lotta folks get all tangled up in them fancy books and videos, but really, you just gotta know what you’re doin’. If you wanna make a gold shaker table for yourself, I reckon I can give you a few pointers on how to do it right. So, let’s dive in and see what needs to be done.

First off, you’ll need to gather up some materials. You won’t need much, just a few pieces of wood, some bolts, a motor, and of course, a good ol’ piece of screen. The most important thing is gettin’ the angle right on your table, ’cause that’s what’ll help the gold separate from all the other junk. You can get the measurements from plenty of places, but if you want to build it yourself, here’s a rough guide to start with.

• Materials: Wood, bolts, a motor, and screen.
• Tools: Saw, drill, screwdriver, and measuring tape.
• Time: Might take you a weekend, or maybe a bit longer if you get distracted.

Now, when you’re ready to start, the first thing you gotta do is cut your pieces. You’ll need a flat surface to work on, something steady. You don’t want it wobbly, or the whole thing could fall apart. Cut the wood for your base, the table top, and the legs. Once you’ve got those, you’ll need to figure out where to place the motor and the angle of the table.

As I said before, the table needs to be slanted just right. It ain’t gotta be much, just enough so when you put your mixture of dirt and gold on it, the heavy stuff like gold can slide down, while the lighter stuff stays up. You can get a motor that’ll make the table shake, and that’s what does most of the work. Just make sure you attach the motor right, so it don’t wobble or slip off. A good sturdy mount will save you a lot of headache later on.

After that, you’ll need to add a screen over the table. This’ll help catch the gold particles as they slide down. It’s kinda like sifting through dirt with a screen, but this time the shaking does the work for ya. The screen’s gotta be tight enough to catch the gold but loose enough so water can flow through it, carrying away the dirt and debris.

Once all that’s done, you’ll need to hook up a water source. The shaker table works best with a little water running over it, which helps separate the gold from all the finer dirt. You can use a garden hose or even a small pump to get the water flowing.

So, now that you’ve built your shaker table, the real test is usin’ it! Start by puttin’ a little bit of dirt and gold on it and watchin’ it shake. Make sure you adjust the angle and the speed of the shaking to get the best separation. It might take a few tries before you find the right setup, but that’s all part of the fun. After a while, you’ll see the gold start to collect in one place, while the dirt washes away.

And don’t you worry none about the plans, there’s plenty of places where you can get the free blueprints for a shaker table, or you can just follow along with some videos. But I always say, the best way to learn is to get your hands dirty and give it a try yourself.

Now, I ain’t gonna say it’s gonna be easy every time. Sometimes, you might get a little bit of dirt mixed in with your gold, or it might take a bit longer to get the right angle on the table. But don’t give up! Keep at it, and soon enough you’ll be gettin’ that fine gold with the best of ’em.

So, that’s the long and short of it. You don’t need no fancy tools or books to build a shaker table. Just a little bit of know-how, the right materials, and some patience. And before you know it, you’ll be separatin’ gold like a pro.

Tags：[Gold Shaker Table, DIY Gold Shaker, Shaker Table Plans, Build Shaker Table, Gold Recovery, Gravity Separator, Shaking Table, Fine Gold, Gold Mining]