How to Make a Picnic Table Salt and Pepper Shaker Holder: DIY Step-by-Step Guide

Well, let me tell ya, making a salt and pepper shaker holder for a picnic table ain’t too hard if you know where to start. Now, we ain’t talkin’ about no fancy stuff, just some good ol’ DIY ideas that’ll help ya keep your table neat and organized while you enjoy your meal out in the open. So, grab your tools and follow along, and I’ll show ya how to make a simple holder that’ll keep your shakers right where ya need ’em!

First off, you need to figure out what materials you want to use. You can use wood, plastic, or even some metal if that’s what you got lying around. If you’re like me, I’d say wood’s the easiest. It’s sturdy, cheap, and you can easily get some scraps from the old barn or the shed. But you can also use little jars or bottles if you’re in a real pinch. Ain’t no shame in that! Just make sure it’s something that’ll hold up against a little wind and all that mess from the kids running around.

What You’ll Need:

• Some sturdy wood (or plastic if that’s all you got)
• Glue or screws (either works fine, just make sure it sticks)
• A saw (unless you’re using some ready-made boxes or jars, then you’re good)
• A drill (to make the holes for your shakers)
• Paint, if you wanna get fancy with it
• Sandpaper to smooth out them rough edges

Now, start by cutting your wood into little pieces. You don’t need big chunks, just enough to hold your salt and pepper shakers up. Usually, something about 6 inches long should be fine for each side. You’ll need four pieces for the base and sides. Don’t worry about making it all perfect; just make sure it’s big enough to hold the shakers without them fallin’ off when the wind blows. If you’re usin’ plastic or metal, you can skip this part and just use what you got.

Once you’ve got your pieces cut, take some sandpaper and smooth out any rough spots. You don’t want nobody gettin’ splinters or cuts, especially at a nice picnic. After that, it’s time to glue or screw the pieces together. Now, if you’re using screws, make sure they don’t stick out too far, or it’ll just make a mess. Glue’s fine if you don’t have screws, but be patient and give it time to dry so it don’t fall apart while you’re movin’ it around.

Next, you’ll need to drill some holes in the top where the shakers are gonna sit. If you’re using jars, just drill a hole big enough for the neck of the jar to sit through, or if it’s a wooden holder, make the holes a little deeper so the shakers don’t wobble. Space ’em out so folks can get to both salt and pepper easy without makin’ a mess. Don’t forget, you’ll need enough space for the lids to spin so you can pour the stuff out!

Optional Step: Painting

If you’re feelin’ extra crafty, you can paint your holder to match your picnic theme. Use some outdoor paint so it doesn’t peel off when it gets wet. Ain’t no shame in makin’ it pretty, especially if you’re the one hosting the picnic. But if you ain’t in the mood, just leave it as is. Natural wood has its own charm too!

Once it’s all dry and set up, it’s time to load up your salt and pepper shakers. You can use any ol’ shakers you got—old mason jars work just fine, or you can buy some fancy ones if that’s your thing. Just make sure they’re sturdy and not gonna tip over when you go for a sprinkle. Place the shakers in their spots, and you’re all set! Now, you’ve got yourself a nice little holder that’ll keep your salt and pepper safe and sound for every picnic you throw.

So, there ya go! It ain’t a hard thing to do, just takes a little time and some patience. With this little holder, you’ll never be searchin’ for the salt again, and everything’ll be right where you need it. Enjoy your picnic, and don’t forget to share your salt and pepper with others—ain’t no harm in being generous, right?

Tags：[DIY Picnic Table Holder, Picnic Salt and Pepper Holder, How to Make Salt and Pepper Shaker Holder, Picnic Table Organization, Picnic Table Decor, Simple Picnic Projects]