Well, let me tell ya about this small gold shaker table thing, ‘cause some folks might not know what it does. This little table, ain’t big as a regular table at all, just a bit bigger than your kitchen tabletop, but boy, it’s got a real knack for pickin’ out fine gold from all that dirt and sand. Now, a small gold shaker table’s real good if you’re huntin’ those tiny gold bits that’s too small to see with your bare eyes—down to somethin’ called 400 mesh, or even finer, they say!
First off, how does this small gold shaker table work? Well, picture it like a washboard you’d use to scrub clothes on, but it ain’t for laundry. The table shakes back and forth real steady like, and it tilts a bit, so when you throw some dirt and water on it, the heavy stuff (like gold) goes one way, and the lighter stuff washes off. That’s the trick—it separates the gold by weight, and that little table don’t need much water to do its job neither. Mighty handy if you’re workin’ somewhere water ain’t easy to come by.
Now, the good part about these small tables is they’re made sturdy, and they ain’t guzzling a ton of power. That’s right, real low on power, which makes ‘em easy to run without costing an arm and a leg. And ya don’t need no fancy chemicals to get the gold separated, so you’re not messin’ up the ground or the water. Just you, some dirt, a bit of water, and this table.
They say you can get particles down to 40 microns, and even smaller gold down to 10 microns. Now, I know that might sound like some mumbo jumbo, but let me tell ya, that’s real small. Like smaller than a speck of dust! This table catches that kind of fine gold without a fuss. It’s simple enough for someone who ain’t got no special trainin’ to figure out too. You just gotta adjust the speed and maybe tilt it a bit, and you’re all set.
One of the popular types is called the RP-4 shaker table, and it can handle up to 800 pounds of material in an hour! That’s a whole lotta dirt! You throw in sand and whatever other stuff you dug up, and it’ll sift through all of that to grab every tiny bit of gold it can. Even if it’s only got a little black sand left, that table’s still pickin’ out gold.
Another good one folks talk about is the Xtruder 255 gold shaker table. It’s small, but it’s got this fine variable speed control. You can adjust it to exactly the speed you need to catch those tiny gold bits, and it works steady-like, without stoppin’. Holds up to about 255 pounds every hour. That’s some serious work comin’ from a little table!
Now, these gold shaker tables don’t all come the same. Some of ’em, like ones made by DOVE, they say are the best in the business for sortin’ through different minerals, not just gold. They use a wet gravity separation method. What that means is the table’s got a special slope and it shakes side-to-side, kinda layers everything out, and the heavier stuff like gold settles at the bottom.
If you’re thinking about buyin’ a small gold shaker table, there’s a few things to keep in mind. First, check if it’s made strong, ‘cause you don’t want it breakin’ after a few uses. Then, see if it’s got low power needs and no chemical stuff required. Some tables come with riffles or grooves on top, like rows in a field, to help catch the gold and keep it from slidin’ right off. Also, remember, it’s gotta be easy to clean, ‘cause after workin’ a bunch of dirt, that thing’s gonna need a good scrubbin’ every now and then.
So, to wrap it all up, a small gold shaker table might just be what ya need if you’re goin’ for that fine gold. It’s efficient, easy on the power, and don’t mess with the environment too much. If you’re lookin’ for gold down to the finest bits, this little table’ll do the trick, and you don’t need no fancy setup. Just some dirt, a bit of water, and off ya go!
Tags:[small gold shaker table, gold recovery, RP-4 shaker table, Xtruder 255, mining equipment, gold shaker table features]